Tesseract All-Metal High-Flow Hotend Kit for Sovol SV08 and SV08 MAX, 300°C High-Temperature Replacement Extrusion Core Upgrade with Titanium Heatbreak & Copper Alloy Block

-20%

Tesseract All-Metal High-Flow Hotend Kit for Sovol SV08 and SV08 MAX, 300°C High-Temperature Replacement Extrusion Core Upgrade with Titanium Heatbreak & Copper Alloy Block

(Includes Standard Shipping & GST)

(0 reviews)

About this item

Bimetallic Thermal Architecture: Integrates a structural titanium alloy throat block coupled alongside a copper alloy heating assembly to maintain a definitive, sharp thermal transition zone that stops filament softening before it enters the melt chamber.
300°C High-Temperature Threshold: Optimized all-metal construction effortlessly sustains continuous high-thermal print profiles, opening up safe, seamless processing for specialized materials like Nylon, ABS, PC, and carbon-fiber blends.
Rapid Melt-Zone Performance: Features a specialized high-volumetric flow configuration designed to thoroughly melt incoming filament instantly, allowing your printer to run at maximum acceleration rates without encountering under-extrusion gaps.
Complete Drop-In Electronics: Arrives fully equipped with a high-efficiency 64–72W ceramic heating plate and a precision-calibrated 100K thermistor wiring harness for seamless plug-and-play integration directly into your factory toolhead board.
Anodized Radiator Matching: Incorporates a precision-milled 6061 aluminum alloy heat dissipation element that fits flawlessly into the stock SV08 toolhead fan duct, maintaining perfect structural Z-height alignment.

4 in stock

Estimated Delivery:

11 - 18 Aug, 2026

Guaranteed safe & secure checkout

Description

Unleash the maximum throughput capabilities of your CoreXY machine with the Tesseract All-Metal High-Flow Hotend Kit. Form-engineered exclusively for the high-velocity Sovol SV08 and SV08 MAX architectures, this complete thermal core replacement bridges the gap between ultra-fast printing speeds and micro-precision extrusion. At its core, an advanced bimetallic thermal boundary pairs a rigid titanium alloy throat with a high-conductivity copper alloy melt zone to effectively push material boundaries up to 300°C without risk of heat creep. Delivered fully bundled with a pre-wired ceramic heating plate and a high-accuracy 100K thermistor, this drop-in assembly guarantees exceptionally stable thermal cycles, empowering you to process everything from everyday PLA to structural carbon-fiber composites smoothly. Essential Tips for Best Results: Prevent Nozzle Leakage: While this setup features an exceptionally tight manufacturing tolerance, always perform a final hot-tighten check at around 250°C during your initial installation to guarantee an absolute, leak-proof seal between the nozzle and the throat. Run a PID Tune: Because a fresh heater cartridge and block exhibit unique thermodynamic properties, running a standard PID calibration command via your printer’s console immediately after install is highly recommended to prevent temperature fluctuations. Sleeve Alignment: Slip the included black silicone protective insulation case squarely over the heater block; this traps residual heat inside the melt area and shields surrounding cooling fans from accidental radiant heat readings. Essential Tips for Best Results: Static Safety Prep: Always turn off the main power supply and touch a grounded metal object before handling the circuit board to protect sensitive onboard components from electrostatic discharge (ESD). Pin Alignment Check: Carefully align all miniature multi-pin JST terminal plugs straight into their corresponding sockets; pushing them in at an angle can bend the header pins or cause bad electrical contact. Firmware Verification: Ensure your Klipper printer configuration file accurately routes the CAN bus UUID communication path to seamlessly recognize the toolhead expansion board upon initial boot.

Subtotal	₹0.00
Total	₹0.00 (Shipping & GST included)

Filaments

3D Printer Spares

MotherBoards / Control Boards / Display

Tesseract All-Metal High-Flow Hotend Kit for Sovol SV08 and SV08 MAX, 300°C High-Temperature Replacement Extrusion Core Upgrade with Titanium Heatbreak & Copper Alloy Block

About this item

Description

Rating & Review

Related products

Services

Industries

eStore

Contact Us

Company

Filaments

3D Printer Spares

MotherBoards / Control Boards / Display

Shopping Cart

Get Quote