Tesseract Thermistor PT-100 Thermocouple Sensor (For Ultimaker 2 UM2) with Stainless Steel Shell, Size 3mm x 15mm, with KF-2Pin Terminal, Wire Length 1500mm
PT100 special PTFE silver-plated shielded wire. Range of Temperature: 0~450 Degree
The maximum temperature of teflon is approx. 260 degrees. To ensure the pt100 to measure the higher temperature, we use double fibreglass sleeving and 1000-degree thermal adhesive to protect the wire. To make working temperature is able to up to 450 degrees, and avoid the short-circuit or damage during operation.
The PT100 B sensor measures the temperature on the hot end of the Ultimaker 2
Please be aware that a PT100 is not the same as a thermistor and unless your electronics explicitly supports RTD Sensing devices you will need an amplifier board.
The Ultimaker 2 uses PT100 sensors by default, and this sensor allows you to connect your E3D Hotend and Ultimaker electronics with no alteration to the electronics or firmware of the Ultimaker 2.
7 in stock