Description
Technical Details
Reviews (0)
Description
TMC 2208 V2.0
- SPECIFICATIONS: TMC2208 single-axis stepper motor drive chip, Default current:1.25a ,Max current:2.0a ,Input voltage:4.75v-36v. Step resolutions: 256 microsteps / step resolution.
- BENEFITS: Compared to the TMC2100 stepper motor driver module, TMC2208 driver module is with lower heat. The heat of TMC2208 in 0.8A with the equivalent effect of the TMC2100 heat in 0.5A , can be used interchangeably with the TMC2100.
- COMPATIBILITY: Support UART Mode You Can use UART Mode in MKS SGEN L V1.0 / MKS GEN L V2.0 / MKS Robin E3D, SKR 1.3 / 1.4 by setting jumper cap. (No jumper is needed, no welding drive is required, and it is more convenient to use) This function does not support MKS GEN L V1.0
- TECHNOLOGY: With SpreadCycle High Chopper frequency, dcStep, stallGuard2 stall detection technology, CoolStep Stream Dynamic Adjustment technology, can save 70% energy, StealthChop Mute technology.
TMC 2209 V2.0
- UPGRADE: TMC2209 has all functions of TMC2208 & can completely replace TMC2208. It has better heat dissipation, supports bigger current, & sensor less homing function.
- SEGMENTS: Continuing the characteristics of the TMC series drivers, the mute effect is good, maximum segmentation: 256 segments.
- COMPATIBILITY: Supports UART Mode. You Can use UART Mode in MKS SGEN L V1.0 / MKS GEN L V2.0 / MKS Robin E3D, SKR 1.3 / 1.4 by setting jumper cap. (No jumper is needed, no welding drive is required, and it is more convenient to use) This function does not support MKS GEN L V1.0.
- TECHNOLOGY: Larger driver current, maximum current is up to 2.5A and stable printing current is up to 1.8A. Compared with other brand TMC series drives, our drive has better cooling effect.
A4988
- INTELLIGENT CONTROL: Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
- WIDE RANGE OF APPLICATIONS: Stepper motors /3D printer/CNC/engraving machines/Supported 3d printers like Prusa Mendel, ultimaker, printbot, makerbot and so on.You can refer to the code at the back of the module.
- FIVE DIFFERENT STEP RESOLUTIONS: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A.
- PRODUCT PARAMETERS: Size– 1.5mmX2mm (for RAMPS, ultimaker or other compatible boards);The drive current: 2A (best to install the heat sink). PACKAGE CONTAINS A4988 Stepstick Stepper Motor Driver Module x 1ï¼›Heat Sink x1
Related products
Linear Motion Spares – U604zz Bearing Steel 4*13*4mm
₹149.00 – ₹899.00
Heater Components – Heater Cartridge
₹225.00 – ₹999.00
PolyTetraFluoroEthylene (PTFE) Tube
₹120.00 – ₹1,749.00
Thermistor for 3D Printer
₹149.00 – ₹1,599.00
Metal Extruder Kit for 3D Printer (Left Hand / Right Hand / Dual Gear)
₹449.00 – ₹899.00
Rating & Review
There are no reviews yet.