Tesseract 1.75mm All Metal Nozzle Throat Extruder Hot End Throat/Heatbreak 1. 75mm Hotend (Quantity : 3 Pc)
₹449.00Stainless steel built-in feed pipe throat for E3D Hotends.
Acid and alkali resistant, high strength.
Made of superior quality 303 stainless steel, with excellent properties like high melting temperature, high tensile strength and high yield strength.
Tesseract 1.75mm Nozzle Throat Heat Break 3D Printer Extruder Hotend All Metal for E3D V6 3D Printer
₹155.00Bore Diameter : 2.0mm
Screw Size : M6
Length : 25.1 mm
Material : Stainless Steel (All metal no teflon tube)
Tesseract 3D Pen FiIaments Multicolor (10 colors 5m each)
₹279.00- 10 random colors PLA filament to draw your 3D artistic masterpiece. A wonderful set for kids and art lovers to have enjoy while crafting and drawing.
- Universal filaments, compatible with most 1.75 mm 3D pens and printers. These filaments have a dimensional Accuracy +/- 0.03 mm
- PLA Filament is Non-Toxic and safe for everyone to use
- This filament for 3D pen can be worked at a wide range of temperatures. The extrusion temperature of the PLA filament ranges from 180 to 210°C
- Quantity: 10 colors, Each Color Length is 5 Meter, Total 50 Meters
Tesseract 3D Pen FiIaments Multicolor (5 colors 5m each)
₹189.00- 5 random colors PLA filament to draw your 3D artistic masterpiece. A wonderful set for kids and art lovers to have enjoy while crafting and drawing.
- Universal filaments, compatible with most 1.75 mm 3D pens and printers. These filaments have a dimensional Accuracy +/- 0.03 mm
- PLA Filament is Non-Toxic and safe for everyone to use
- This filament for 3D pen can be worked at a wide range of temperatures. The extrusion temperature of the PLA filament ranges from 180 to 210°C
- Quantity: 10 colors, Each Color Length is 5 Meter, Total 50 Meters
Tesseract 3D Printer Accessories Thermal Grease GD 900 0.5gm Packets (Set of 5)
₹279.00High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.
Working Principle : Filling the gap between heating element and the cooling device; increasing the contact area so as to achieve the soundest thermal conductivity effect.
Method of Use : It is normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).
Color : Gray
Net Weight : 0.5 Gram
Thermal Conductivity : 4.8 W/M-K
Operation Temperature : -50 – 200 Degrees Celsius
Tesseract 3D Printer Allen key Set
₹200.00Allen key Set : Consists of Allen keys, small screw driver and wrenches which can be used to assemble and dis-assemble any DIY 3d printer. Very handy for quick problem solving