Showing 1–8 of 84 results

Show sidebar

Tesseract 1.75mm Nozzle Throat Heat Break 3D Printer Extruder Hotend All Metal for E3D V6 3D Printer

175.00 155.00

Bore Diameter : 2.0mm
Screw Size : M6
Length : 25.1 mm
Material : Stainless Steel (All metal no teflon tube)

Tesseract 1.75mm Titanium Alloy Heat Break For E3D V6 or Volcano (Set of 2)

700.00 650.00

This high temperature All metal Titanium alloy heat break can help you print high temperature materials on your e3d hotend.

The interface is smoother and more precise (can effectively prevent the filament from leaking)

The inner wall of the tube is smoother (Reducing the chance of filament clogging)

The appearance is more shiny, thread precision improvement.

Length : 22 mm
Screw Size : M6

Tesseract 100K ohm NTC 3950 Thermistor/Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring

169.00 152.00
  • High sensitivity, has a swift response, 1 percent, resistance value at 25°c= 100k
  • NTC is thick and heating rod is of high quality
  • Compact structure, easy to install
  • Wiring insulation has high temperature Teflon/ PTFE
  • Adaptive thermo-sensitive material

Tesseract 100K ohm NTC 3950 Thermistor/Temperature Sensor for 3D Printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring (Quantity 3)

499.00 449.00
  • High sensitivity, has a swift response, 1 percent, resistance value at 25°c= 100k
  • NTC is thick and heating rod is of high quality
  • Compact structure, easy to install
  • Wiring insulation has high temperature Teflon/ PTFE
  • Adaptive thermo-sensitive material

Tesseract 100K ohm NTC B3950 Thermistor High Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring for E3D PT100 V6 Heater Block Printer

499.00 199.00

Compatible with : PT100 V6 block
NTC is thick and heating rod is of high quality
Compact structure, easy to install
Wiring insulation has high temperature Teflon/ PTFE
Adaptive thermo-sensitive material

Tesseract 100K ohm NTC B3950 Thermistor High Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring for E3D PT100 V6 Heater Block Printer (Quantity 3)

399.00 349.00

Compatible with : PT100 V6 block
NTC is thick and heating rod is of high quality
Compact structure, easy to install
Wiring insulation has high temperature Teflon/ PTFE
Adaptive thermo-sensitive material

Tesseract 12V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity 1 pc, with 1m wire) (12V 40 watts)

195.00 175.00
  • Material: Stainless Steel
  • Core: Ceramic
  • Voltage: 12V/24 Power: 40W
  • Diameter: 6mm
  • Heating Length: 20 mm Wire Length: 100 cm

Tesseract 24V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity 1 pc, with 1m wire) (24V 40 watts)

225.00 202.00
  • Material: Stainless Steel
  • Core: Ceramic
  • Voltage: 12V/24 Power: 40W
  • Diameter: 6mm
  • Heating Length: 20 mm Wire Length: 100 cm