Showing 1–8 of 22 results

Show sidebar

Tesseract 100K ohm NTC 3950 Thermistor/Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring

169.00 152.00
  • High sensitivity, has a swift response, 1 percent, resistance value at 25°c= 100k
  • NTC is thick and heating rod is of high quality
  • Compact structure, easy to install
  • Wiring insulation has high temperature Teflon/ PTFE
  • Adaptive thermo-sensitive material

Tesseract 100K ohm NTC 3950 Thermistor/Temperature Sensor for 3D Printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring (Quantity 3)

499.00 449.00
  • High sensitivity, has a swift response, 1 percent, resistance value at 25°c= 100k
  • NTC is thick and heating rod is of high quality
  • Compact structure, easy to install
  • Wiring insulation has high temperature Teflon/ PTFE
  • Adaptive thermo-sensitive material

Tesseract 100K ohm NTC B3950 Thermistor High Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring for E3D PT100 V6 Heater Block Printer

499.00 199.00

Compatible with : PT100 V6 block
NTC is thick and heating rod is of high quality
Compact structure, easy to install
Wiring insulation has high temperature Teflon/ PTFE
Adaptive thermo-sensitive material

Tesseract 100K ohm NTC B3950 Thermistor High Temperature Sensor for 3D printer Extruder or Heated Bed Pre-Wired with Teflon Insulated Wiring for E3D PT100 V6 Heater Block Printer (Quantity 3)

399.00 349.00

Compatible with : PT100 V6 block
NTC is thick and heating rod is of high quality
Compact structure, easy to install
Wiring insulation has high temperature Teflon/ PTFE
Adaptive thermo-sensitive material

Tesseract 12V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity 1 pc, with 1m wire) (12V 40 watts)

195.00 175.00
  • Material: Stainless Steel
  • Core: Ceramic
  • Voltage: 12V/24 Power: 40W
  • Diameter: 6mm
  • Heating Length: 20 mm Wire Length: 100 cm

Tesseract 12V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity: 3, with 1m Wire) (12V 40 Watts)

1,000.00 449.00
  • Material : Stainless Steel
  • Core : Ceramic
  • Voltage : 12V/24 Power : 40W
  • Diameter : 6mm
  • Heating Probe Length: 20 mm, Wire Length : 100 cm

Tesseract 12V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity: 5, with 1m Wire) (12V 40 Watts)

1,000.00 649.00
  • Material : Stainless Steel
  • Core : Ceramic
  • Voltage : 12V/24 Power : 40W
  • Diameter : 6mm
  • Heating Probe Length: 20 mm, Wire Length : 100 cm

Brand new and high quality, this heater cartridge can increase the reliability of your extruder and also heats up faster.

It fits nicely in most extruders, being an easy replacement.

We have 2 versions of the Ceramic Cartridge Heater available. – 12V 40W Ceramic Cartridge Heater 6x20mm for 3d printer prusa Mendel, Creality CR10S machines – 24V 40W Ceramic Cartridge Heater 6x20mm for 3d printer Creality Ender Series Machines

Tesseract 24V 40W Ceramic Cartridge Heater for 3D Printer Extruder (Quantity 1 pc, with 1m wire) (24V 40 watts)

225.00 202.00
  • Material: Stainless Steel
  • Core: Ceramic
  • Voltage: 12V/24 Power: 40W
  • Diameter: 6mm
  • Heating Length: 20 mm Wire Length: 100 cm